GLOBAL CHOICE · ONE-STOP SUPPLIER
steel, machinery,plant construction,digital and integent industrial chain base
Contact us now
Low Carbon Wire Rod 5.5mm 6.5mm Black SAE 1006/SAE1008 Steel Wire Rod for Nails Wire
Detail Information
ASTM Standard Alloy Hot Rolled Structural Steel H Beam
Wire rod is a long steel product formed by hot rolling billets into a continuous round section and coiling the finished material for delivery. It functions as the essential feedstock for wire drawing operations, where the rod is pulled through a series of dies to reduce its diameter and produce various wire products. The quality of the wire rod — its chemical composition, surface condition, and dimensional consistency — directly determines the efficiency of the drawing process and the properties of the finished wire.
Wire rod is categorized primarily by carbon content. Low carbon wire rod (typically below 0.25% carbon) is suitable for general-purpose wire, galvanized wire, nails, and welded mesh. High carbon wire rod (typically 0.45% to 0.85% carbon) is used for high-strength applications such as PC strand, spring wire, and tire cord. Each grade requires precise control during steelmaking and rolling to meet the specified mechanical properties.
Specification
WIRE ROD | |
Material | sae1006,sae1008,sae1018,Q195, Q235, 82B |
Diameter | 0.3mm-12.5mm |
Length | As customer's requirment |
Tolerance | ±0.01mm – ±0.05mm |
Heat Treatment | Annealed / Spheroidized Annealed |
Standard | API 5L, ASTM A53-2007, ASTM A671-2006, ASTM A252-1998, ASTM A450-1996, ASME B36.10M-2004, ASTM A523-1996, BS 1387, BS EN10296,BS6323, BS 6363, BS EN10219, GB/T 3091-2001, GB/T 13793-1992, GB/T9711 |
Application | Construction,ACSR,armoring cable, handicrafts, Cotton packaging,screen preparation |
Product describe
· Hot Rolled Round Section— Uniform circular cross-section delivered in coil form, optimized for subsequent wire drawing and cold forming processes.
· Controlled Cooling — Stelmor conveyor cooling or equivalent process provides uniform mechanical properties and a manageable scale layer suitable for mechanical descaling or pickling.
· Smooth Surface Finish — Low incidence of surface defects such as laps, slivers, and scale pockets that can interrupt high-speed wire drawing operations.
· Coil Packaging — Coils are compressed and strapped with a minimum of four steel bands, with individual coil tags showing heat number, grade, diameter, weight, and production date for full traceability.
Applicant
Wire rod is the starting material for a wide range of downstream wire and fastener products. Primary applications include:
·Wire Drawing — The most common use, where rod is drawn through carbide dies to produce wire for construction tying, fencing, baling, and general industrial use.
·Galvanized Wire Production — Low carbon wire rod drawn and hot-dip or electro-galvanized produces wire for gabions, chain-link fencing, barbed wire, and agricultural applications.
·Nail and Fastener Manufacturing — Wire rod is the feedstock for nail-making machines, producing common nails, concrete nails, roofing nails, and other wire-formed fasteners.
·Welded Wire Mesh — Drawn wire from rod is fed into automatic mesh welding lines to produce panels for concrete reinforcement, fencing, and industrial grating.
·PC Strand and Prestressed Wire — High carbon wire rod is drawn and stranded for prestressed concrete applications in bridges, railway sleepers, and high-rise construction.
·Welding Electrodes — Specific grades of wire rod are drawn, straightened, cut, and coated to produce manual arc welding electrodes for structural and pipe welding.
Our workshop
Packing and Delivery
Packing:
H sections sections are bundled in uniform lot sizes and secured with steel strapping to prevent shifting during transport. Each bundle is tagged with heat number, grade, dimensions, and weight for clear identification at the destination. For ocean freight, bundles are loaded into containers or onto flat-rack platforms depending on length, with edge protectors applied at contact points to avoid surface damage.
Certificate
FAQ
1. How can we guarantee quality?？
Always a pre-production sample before mass production; Always final Inspection before shipment;2. Why should you buy from us not from other suppliers?
We have 30 years of experience in the steel trade industry, along with supporting production and processing equipment, a comprehensive supply chain guarantee, and provide high-quality service to our customers.
3. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
4. What is the acceptable MOQ?
Our acceptable MOQ is 5 ton. Any trial order in small quantity is welcome.
Get a Quotation
Discussing your structural steel requirements early helps us recommend the right H beam sections for your project — including size, grade, and delivery planning. Whether you are sourcing for a single building or an ongoing construction program, we can provide mill-certified material with the documentation your project demands.
Contact our sales team to request a quotation, confirm current stock availability, or discuss custom specifications.
Related Products
Please send your message to us
- Name
- Phone
- *Title
- *Content
We will get you a fast free quote and schedule your job on the day and time that works best for you.
subscription
